"We Know How To Shape Concrete"
PRODUCTS

Single Shaft Mixer

The propulsion is provided by the help of a dual motor operating separately and reducer. For that reason when one of the motors and gears are defected the capacity is halved and concrete production can continue by a single motor.
As the number of bearings is not too much, the possible problems related to the bearings are minimized. In addition, since the bearing system is located on the outside; the concrete production continues without interruption in case of a possible grout access.
As the drive system is double-sided, the concrete production can be performed even in low slump.
As the concrete discharge system is pneumatic, concrete can be easily discharged by opening the cover even in power cuts.
As the paddles of the mixer are helix shaped, the paddles turn by completely wearing the wall of the drum and for that reason it is not required to clean it too often. The time period required for cleaning it is shorter comparing to the other mixers.
Thanks to the characteristic of its drive system, corrosion is minimized. This provides to get the maximum efficiency from the machine by preventing the possible costs.
The lifetime of its bearings is longer thanks to its time adjusted automatic oiling system.
As the helix mixers rotate parallel to the wall of the drum, concrete mixing time is very short.
As the internal plates of the drum are the same in most locations, the parts wearing more can be replaced and a longer lifetime is provided.
As all walking platforms are hinged, installation is fast and easy.

MODEL   CSMIX-500  CSMIX-1000  CSMIX-1500  CSMIX-2000
Capacity  m3  0,50 1,5   2
Mixer Type Wet  Single Shaft Single Shaft Single Shaft Single Shaft
Drive System     Single Side  Both Sides Both Sides Both Sides
Mixer Arms    Helical  Helical Helical Helical
Motor   Kw 1 x 18,5    1 x 37 2 x 22   2 x 37
Rotation Speed Rpm 12-14 12-14 12-14 12-14
Cement Weighing  Kg 300  600  750  1000 
Water Weighing  Lt 300   400  400 500 
Additive Weighing  Kg 20   30  30 30 
Body Wearings   16-18 Double Chromed Mangan 16-18 Double Chromed Mangan 16-18 Double Chromed Mangan 16-18 Double Chromed Mangan  
Hellical Plates   16-18 Double Chromed Mangan 16-18 Double Chromed Mangan  16-18 Double Chromed Mangan 16-18 Double Chromed Mangan
Discharge   Pneumatic Cover Pneumatic Cover Pneumatic Cover   Pneumatic Cover
Side Wall Wearings   Hardox 400   Hardox 400 Hardox 400   Hardox 400
Lubrication   Automatic 4 Points Automatic 6 Points   Automatic 6 Points Automatic 6 Points  
Safety Sensor    Yes  Yes  Yes  Yes
Emergency Stop      Yes  Yes  Yes  Yes

Our Contact Information

+90 312 394 49 10 info@conpromac.com